wholesale silver stone jewelry What does the CNC operation do? What do you usually do in the workshop?

bluebell wholesale costume jewelry CNC is the abbreviation of Numerical Control.
This refers to the CNC processing center, that is, ordinary processing machines now become the type controlled by computer.

The characteristics of CNC Turret Punch: Usually CNC training in the market mainly refers to milling machines, and it is a lecture processing center.
The training for CNC punching has not yet been in Toronto. I have consulted 4 public colleges, Chinese training schools and some foreign training schools. Therefore, the competition is relatively peaceful;

The concept of punching to everyone is very dangerous, because in China, crushing often causes accidents and other accidents, but it is a hand -made punch. Without infrared protection, I first saw that the imported CNC punching was at the domestic exhibition. The display machine was processing a sample of a panda pattern. Actually Punching, in terms of safety, the operator is far away from the machine, just press the start button, not even the Stop button does not have to be pressed; at the same time, the operator stays from the machine when the machine is running, and the machine stops when the operator operates. The machine stops. That is, the motor stopped, the human motivation stops, and it is impossible to impulse; all the machine movements are controlled by the program. Once the machine operates abnormally, it will only stop and give a reporting information. No other accidents will occur;

The punch is a two -dimensional plane movement, which is easy to get started. In fact, it is a faster way to employment for new immigrants, especially for those non -mechanical technical immigrants. Of course, if you have learned the CNC milling machine and then turned to the punching bed, it is very easy, and you do n’t ask you to program it. You can just operate it. At least learn to setup, which is not difficult.

is a shortcut to get rid of the situation of pure workers. Why do you know that you must learn to program in learning and milling, you can really work independently, and the punching bed is different. As a special position, there is a special person programming. All you have to do is process the parts to process the parts. On the other hand, once you become a workshop, you will not work in the workshop. , No longer belonging to Labor, and this process, if you work hard, you can achieve it in one year, because all you have to do is to learn the sheet metal design function of the software of Pro-Endineer, and in the same time, you can be able to you Is it a programmer for milling machines? Your milling machine has the highest level of programming. You have to do it in the workshop. I am not slandering the milling machine, but it means that the milling machine is more complicated, and the punch is more suitable for new immigration.

The factories with a wide employment surface, a factory with Turret Punch Machine, must have CNC Punch Press, CNC Brake Press Machine, and some companies will also have Laser Cutting System (CNC). Punch Machine, all of them are CNC, so there are many job opportunities. Once there is a full -operating PUNCH MACHINE (such as AMADA) experience, the starting salary can reach 18/hour. It is said that in these jobs, you can not be limited to a certain model. As long as you find one of the machines, you will hang up with CNC and hook it with the punch.